2013 Caterpillar 627H Scraper

2013 Caterpillar 627H Scraper

$255,000.00

Specifications
Compare

Description

Buy 2013 Caterpillar 627H Scraper – ONLINE

Caterpillar scraper

Description
CAT 627H

EFFICIENCY THROUGH TECHNOLOGY

  • Fuel Economy Mode is a two part feature when selected, the first part of the feature lowers the transmission shift points allowing shifting to take place at lower rpms to aid in fuel savings. The second part of the Fuel Economy Mode allows the machine when operated at engine rpms less than full throttle to automatically vary the power distribution between the tractor and the scraper, allowing the machine to utilize the more efficient tractor power train vs. the full time torque converter drive scraper power train.
  • Fuel Economy Mode is a two part feature when selected, the first part of the feature lowers the transmission shift points allowing shifting to take place at lower rpms to aid in fuel savings. The second part of the Fuel Economy Mode allows the machine when operated at engine rpms less than full throttle to automatically vary the power distribution between the tractor and the scraper, allowing the machine to utilize the more efficient tractor power train vs. the full time torque converter drive scraper power train.
  • Machine Speed Limit is designed to take the place of top gear selection. If the machine top speed needs to be limited the operator can select the top speed through the display or the top speed can be set in ET. This will allow the machine to find the correct gear that works best for the engine and transmission. Allowing the engine and transmission to select the correct gear to pull the load in most cases resulting in a lower engine load factor and lower fuel burn verses using top gear selection that required the machine to run at engine speeds at or close high idle.

OPERATOR COMFORT AND CONTROL

  • The H Series steering system design requires significantly less steering effort. The reduced steering effort will allow for decreased operator fatigue and a more efficient operator resulting in possible higher rates of production late in the work cycle.
  • Advanced Cushion Hitch prevents end stroke by having the ability to predict end stroke events and manage the rate of dampening. The desired result is improved hitch repair, reduced maintenance and improved operator ride in rough conditions.
  • The interior of the H Series cabs has improved the operator comfort and visibility by redesigning the dash area and key pad placement.

BUILT-IN SAFETY FEATURES

  • Engine Over Speed Protection – In the event of an engine over speed situation, the compression brake or brakes will automatically engage with no operator input. The machine determines the over speed condition based on rate of acceleration and applies compression brakes automatically.
  • Differential Lock Engagement Protection feature allows the machine to prevent the operator from engaging the differential lock when damage could occur.
  • The open bowls now come standard with bowl side overflow guards to help prevent material from flowing over the bowl sides and falling onto the draft arms where material becomes lodged between the bowl side and draft arm resulting in decreased work cycle times.

SAVE ON MAINTENANCE TIME

The filter bank located at the rear of the engine compartment has undergone improvements for serviceability by raising the filter bank up for easier access.

  • In cold weather conditions the machine will use the Auto Stall feature to help warm up the transmission oil faster resulting in the machine shifting out of torque converter drive (2nd gear) faster than on previous models.

GENERAL

Overall Width 3.57 m
Maximum Depth of Spread 540 mm
Top Speed – Loaded 53.9 km/h
Fuel Tank Refill Capacity – Scraper 1272 l
180° Curb-to-Curb Turning Width 11.8 m
Overall Shipping Height 4.03 m
Scraper Capacity – Struck 13 m³
Scraper Capacity – Heaped 18.4 m³
Width – Cut 3.14 m
Tires – Tractor Drive 33.25R29**E3
Rated Load 26 127 kg (57,610 lb); 26.19 tonnes (28.81 tons)
Maximum Depth of Cut 315 mm
Tires – Scraper 33.25R29**E3

ENGINE

Rated Engine RPM – Scraper 2150 r/min
Engine Model – Scraper Cat C9.3
Rated Engine RPM – Tractor 2000 r/min
Flywheel Power – Scraper 216 kW
Flywheel Power – Tractor 304 kW
Engine Model – Tractor Cat C13
Note (1) C13 engine emits equivalent to U.S. EPA Tier 2/EU Stage II or U.S. EPA Tier 3/EU Stage III.
Note (2) C9.3 engine emits equivalent to U.S. EPA Tier 2/EU Stage II or U.S. EPA Tier 3/EU Stage III.

TRACTOR ENGINE

Flywheel Power – Tractor/Scraper 304 kW (407 hp)/216 kW (290 hp)

SCRAPER BOWL

Scraper Capacity – Heaped 18.4 m³

TRANSMISSION

Top Speed – Loaded 53.9 km/h

SERVICE REFILL CAPACITIES

Hydraulic System 83 l
Crankcase – Tractor 30.58 l
Cooling System – Tractor 45 l
Transmission System – Tractor 93 l
Transmission System – Scraper 49 l
Crankcase – Scraper 28 l
Fuel Tank 1272 l
Cooling System – Scraper 61 l

Caterpillar scraper